Features:
Specification:
Table: | 32” x 66.9” ( 815 x 1700mm) |
Longitudinal travel (X axis ): | 62.5” (1600mm) |
Cross travel: | 31.5” (800mm) |
Vertical travel: | 27.5” (700mm) |
Spindle nose to table top (D): | 7.8”-35.4” (200-900mm) |
Column surface to center of table: | 17.7”-47.2” (450-1200mm) |
Load capacity: | 4840 lb (2200 Kg) |
Spindle taper: | CAT50 |
Spindle Speed (r. p.m.): | (60Hz) 6,000 rpm |
Transmission of spindle & motor: | Gear type |
Spindle center to column front surface: | 33.5” (850 mm) |
Feed Rate: | |
Rapid feed rate: | X/Y: 590 ipm Z: 472 ipm |
Cutting feed rate: | 1-236.1 ipm |
Motor: | |
Spindle motor: | 30HP, Alpha 18i |
Feed motors on XYZ: | 3.5 /4.5/3.5 Kw, Apha 22i |
Coolant pump: | 0.75Kw |
Lubrication pump: | 150Kw |
Power requirement: | 35 KVA |
Automatic Tool Changer: | |
No. of tools: | Swing-Arm type 32 tools |
Max. tool diameter: | 4.7”/9.8” (120/250 mm) |
Max. tool length: | 11.8” ( 300 mm) |
Max. tool weight: | 33 lb (15 Kg) |
Length X Width X Height (LXWXH): | 173” x 132” x 127”(4400mm x 3350mm x 3233mm ) |
Net Weight: | 31400 lbs. ( 14000 Kgs) |