CNC Lathes


Model A1-1

Equipment: Vtplus-15 or Vturn-16/20 + vibrating disc + 5 degree of freedom robot or a gantry robot.
Work Piece Weight: Maximum weight of 1.5 kg
Work Piece Size: Dia(10~40) x (15-85) mm
Condition of use: Machine Cycle time greater than 15 sec
Advantages:
- High reliability
- Light weight
- Rapid speed
- Can work independent of labor for long periods of time
- Work piece orientation determined by the vibrating disc





Model A1-2

Equipment: Vt plus-15, Vturn-16/20/26/36/46, Vcenter-80/105/140, only choose one from the Vturn series and one from the Vcenter series, scara robot, bar feeder pallet.
Work piece weight: Depends on the machines chosen
Work piece size: Depends on the machines chosen
Condition of use: Machine cycle time is more than 40 sec.
Advantages:
- Compact
- Short change over time
- Easily expanded
- The speed of the robot is dependent on its range and the weight of the work piece.