Specification			Vcenter-205
Travel	X axis travel	inch	80.71
	Y axis travel	inch	21.65
	Z axis travel	inch	22.05
Distance	Spindle center to column	inch	25.12
	Spindle nose to table surface	inch	7.09 ~ 29.13
Table	Table work area	inch	98.43 x 21.65
	Dimension of T-slot	inch	0.2 x 0.71 x 3.94
	Max. table load	lbf	2646
Spindle	Spindle taper	inch	CT-40
	Spindle montor-cont / 30 / 10 min	HP(AC)	10 / 14.7 / 20 (opt. 20 / 24.7 29.3)
	Spindle speed	rpm	12000
Feed rate	Rapid feed rate-X/Y/Z	IPM	1181 / 1181 / 1181
	Axis feed motor-X/Y/Z		5.1 / 2.8 / 5.1
	Cutting feedrate by table	IPM	295.3 (opt. 393.7)
	X ballscrew diameter	inch	2
	Y ballscrew diameter	inch	1.57
	Z ballscrew diameter	inch	1.57
	Linear quide width (X/Y/Z)	inch	1.77 / 1.77 / 1.77
Tools	Max. tool length	inch	13.78
	Max. tool weight	lbs	17.6
	Magazine capacity		24 disc (opt. 32)
	Max. tool diameter (without adjacent tools)	inch	ψ3.15 (ψ5)
	Tool exchanging time	sec.	2.5 (T-T)
	Pull stud angle	deg.	15 (JIS-40P)
	Tool selection method		Random
Machine	Power requirement	kVA	40
	Min./Max. air pressure	Psi	80.8 ~ 95.5
	Coolant tank capacity	Gal	105.6 (opt. 158.4 with conveyor)
	Net weight	lbs	FANUC Oi-M
	Std. NC controller		208.66 x 125.2
	Floor space requirement	inch	116.93
	Max. Machine height	inch	19950