Specification Vcenter-55 Vcenter-70 Vcenter-85A/B/C Vcenter-102A/B/C Vcenter-110 Vcenter-130 Vcenter-145
Travel X axis travel inch 21.65 27.56 33.46 40.16 43.3 51.18 57.09
Y axis travel inch 18.11 18.9 20.5 20.5 23.62 23.62 27.56
Z axis travel inch 18.11 20 22.05 22.5 22.05 24.02 27.56
Distance Spindle center to column inch 21.44 21.44 23.62 23.62 23.62 23.62 28.54
Spindle nose to table surface inch 5.9~24 5.9~24 5.9~28 5.9~28 7.1~29.1 6.1~30.1 7.9~35.4
Table Table work area inch 31.5 x 18.11 31.5 x 18.11 43.3 x 20 43.3 x 20 55.1 x 21.65 55.1 x 21.65 65 x 25.6
Dimension of T-slot inch 4 x 0.71 x 3.94 4 x 0.71 x 3.94 5 x 0.71 x 3.94 5 x 0.71 x 3.94 5 x 0.71 x 3.94 5 x 0.71 x 3.94 5 x 0.71 x 3.94
Max. table load lbf 661 1102 1653 (VC-85A/C)
2204 (VC-85B)
1653 (VC-102A/C)
2204 (VC-102B)
1764 1764 4850
Spindle Spindle taper inch CT-40 CT-40 CT-40 CT-40 CT-40 CT-40 CT-50
Spindle montor-cont / 30 min HP(AC) 7.4 / 10 7.4 / 10 7.4 / 10 10 / 12 10 / 12 10 / 12 14.7 / 20
Spindle speed rpm 8000 8000 8000 (VC-85A)
6000 (VC-85B/C)
8000 (VC-102A)
6000 (VC-102B/C)
6000 6000 6000
Feed rate Rapid feed rate-X/Y/Z IPM 1181 / 1181 / 945 1181 / 1181 / 945 945 / 945 / 787 (VC-85A)
787 / 787 / 708 (VC-85B)
945 / 945 / 708 (VC-85C)
945 / 945 / 787 (VC-102A)
787 / 787 / 708 (VC-102B)
945 / 945 / 708 (VC-102C)
945 x 945 x 708 945 x 945 x 708 708 / 708 / 590
Axis feed motor-X/Y/Z HP 1.3 / 1.3 / 2.8 1.3 / 1.3 / 2.8 2.8 / 2.8 / 2.8 2.8 / 2.8 / 2.8 2.8 / 2.8 / 2.8 2.8 / 2.8 / 2.8 4.7 x 4.7 x 4.7
Cutting feedrate by table IPM 295 (opt.394) 295 (opt.394) 295 (opt.394) 295 (opt.394) 295 (opt.394) 295 (opt.394) 295 (opt.394)
X/Y ballscrew (dia. X pitch) inch 1.57 x P0.62 1.57 x P0.62 1.57 x P0.47 1.57 x P0.47 1.57 x P0.47 1.57 x P0.47 1.97 x P0.39
Z ballscrew inch 1.57 x P0.47 1.57 x P0.47 1.57 x P0.39 1.57 x P0.39 1.57 x P0.39 1.57 x P0.39 1.97 x P0.39
Tools Max. tool length inch 9.8 9.8 11.8 11.8 11.8 11.8 15.7
Max. tool weight lbs 15.5 15.5 15.5 15.5 15.5 15.5 33
Magazine capacity   24 (Round) 24 (Round) 24 (Round) 24 (Round) 24 (Round) 24 (Round) 24 (Round)
Max. tool diameter (without adjacent tools) inch 3 (5) 3 (5) 3 (5) 3 (5) 3 (5) 3 (5) 4 (8)
Tool exchanging time sec. 2.5 2.5 2.5 2.5 2.5 2.5 3
Pull stud angle deg. 90 (opt.45) 90 (opt.45) 90 (opt.45) 90 (opt.45) 90 (opt.45) 90 (opt.45) 45
Tool selection method   Random Random Random Random Random Random Random
Machine Power requirement kVA 23 23 23 23 23 23 30
Min./Max. air pressure Psi 80.8 / 95.5 80.8 / 95.5 80.8 / 95.5 80.8 / 95.5 80.8 / 95.5 80.8 / 95.5 80.8 / 95.5
Coolant tank capacity Gal 59.4 63.4 72.9 72.9 92.5 (opt. 2x66) 92.5 (opt. 2x66) 158 (opt. 2x79.25)
Net weight lbs 8,818 9,038 12,566 13,448 16,534 17,195 29,100
Std. NC controller   FANUC Oi-M FANUC Oi-M FANUC Oi-M FANUC Oi-M FANUC Oi-M FANUC Oi-M FANUC Oi-M
Floor space requirement inch 77 x 92.5 83.6 x 92.5 96.4 x 94.5 96.4 x 94.5 126 x 103.3 137.8 x 103.3 149.6 x 148.2
Max. Machine height inch 102.4 104.4 103.9 103.9 114 115 119.3