Print This Page

Vertical Machining Centers

 

Due to the big demand of the vertical machining centers in early 80’s, Victor Taichung produced the first VM3 in 1985, and then VM5 and shortly after, Vcenter-4. Until now, the experience of making the VMCs has helped Victor Taichung exceed the average quality among 100 VMC machine makers in Taiwan. With the self-owned Meehanite licensed foundry producing constant quality, and all Fanuc control components and the heavy duty construction makes the machines suitable for the heavy used production line. The range of VMCs is from 21" to 57" on X-axis travel, optional with pallet changer. For the moving column model, the X-axis travel is up to 80". The range of the spindle speed is from 6000 to 15000 rpm. The standard 3-step working status lights and air conditioner for electrical apply to all models.

Advanced 5-Axis Application with the models of Vcenter-AX350/AX800.

X-axis travel 21.65" 27.56" 33.46" 40.16" 43.3" 51.18" 57.09" 65" 80"
3-axis
Linear guides
Vcenter-55
Vcenter-55APC
Vcenter-70
Vcenter-70APC
Vcenter-A72
Vcenter-85A Vcenter-A85
Vcenter-102A
Vcenter-A110 Vcenter-A130
Vcenter-205
New 2017 (all linear) Vcenter-P76 Vcenter-P106 Vcenter-P136
Boxway Column
Vcenter-85C
Vcenter-102C
Vcenter-110
Vcenter-130
3-axis boxway
Vcenter-85B
Vcenter-102B
Vcenter-145
Vcenter-165

Specification:

Vcenter-55-165-205    Vcenter-A72/A85/A110/A130    Vcenter-AX350/AX800

Item Units Vc-P76 Vc-P106 Vc-P136
Travel X axis travel inch 29.92 41.73 53.54
Y axis travel inch 19.69 23.62 27.56
Z axis travel inch 20 (opt. 27.16) 22 (opt. 29.92) 27.56
Distance Spindle center to column inch 22.24 24.68 31.18
Spindle nose to table surface inch 4.73~24.8 (opt.31.89) 5.9~27.95 (opt. 35.83) 3.94~31.89
Table Table work area inch 33 x 20 44 x 20 55 x 28
Dimension of T-slot inch 4 x 0.71 x 3.94 5 x 0.71 x 3.94 7 x 0.71 x 3.94
Max. table load lbs 1100 1323 2205
Spindle Spindle taper BCV-40 BCV-40 BCV-40
Spindle motor - cont/60%/25% (Fanuc) hp 15/20/25 (w/t CTS) 15/20/25 (w/t CTS) 15/20/25 (w/t CTS)
10/15/20 (for CTS) 10/15/20 (for CTS) 10/15/20 (for CTS)
Spindle speed rpm 12000 (opt. 15000) 12000 (opt. 15000) 12000 (opt. 15000)
Feed rate Rapid feed rate - X/Y/Z (Fanuc) inch/min 1890 / 1890 / 1260 1890 / 1890 / 1260 1260 / 1260 / 1260
Axis acceleration - X/Y/Z m/sec2 0.7G / 0.7G / 0.5G 0.7G / 0.7G / 0.5G 0.4G / 0.4G / 0.5G
Axis feed motor - X/Y/Z (Fanuc) hp 4 / 4 / 4 4 / 4 / 4 4 / 4 / 4
Cutting feedrate by table inch/min 787 787 787
X/Y/Z ballscrew (dia. x pitch) inch 1.6 x P0.63 (X) 1.8 x P0.63 (X) 1.8 x P0.63 (X)
1.6 x P0.63 (Y/Z) 1.6 x P0.63 (Y/Z) 1.8 x P0.63 (Y/Z)
Linear guide width (X/Y/Z) inch 1.2 / 1.4 / 1.8 1.4 / 1.8 / 1.8 1.8 / 1.4 (4 off) / 1.8
Tools Max. tool length inch 11.8 11.8 11.8
Max. tool weight lbs 15.4 15.4 15.4
Magazine capacity 30 (opt. 40) 30 (opt. 40) 30 (opt. 40)
Max. tool diameter inch 2.9 (5.9) 2.9 (5.9) 2.9 (5.9)
(without adjacent tools)
Tool exchange time sec. 1.8 (T-T), 4.3 (C-C) 2.1 (T-T), 4.3 (C-C) 1.8 (T-T), 4 .9 (C-C)
Pull stud angle deg. 15 (JIS 40P) 15 (JIS 40P) 15 (JIS 40P)
Tool selection method Random Random Random
Machine Power requirement kVA 23 (excl. CTS) 23 (excl. CTS) 23 (excl. CTS)
Min/Max. air pressure psi 78-92 78-92 78-92
Coolant tank capacity L 220 300 450
Std. NC controller (Fanuc) 0i-MF (10.4") 0i-MF (10.4") 0i-MF (10.4")
Floor space requirement inch 111 x 107 132 x 111 169 x 117
Max. machine height inch 108 112 121
Machine weight lbs 12125 14220 19577

Home   About   Contact