VH-2200
Features:
- Fanuc Oi-MC Package A with Manual Guide I, 10.4” LCD
- 30HP Spindle Motor: alpha 18i, CAT50 Spindle Taper
- 6000 rpm spindle speed Built-in Gear Head with Spindle oil cooler
- Spindle dia.110mm, quill dia. 150mm, fitted with Hi-Lo gears for heavy cutting over wide range of spindle speed
- Fanuc Package A : XYZ motor: alpha 30i
- Swing-Arm type 32 tools ATC
- Super grade Turcite-B On X/Y/Z Slideways and Gibs
- Hardened & Ground X&Y&Z all Slideways
- 50mm,C3 Double nut precision ballscrews
- Meehanite Casting with annealed & stress relieved
- 1000mm, 39.3”, Y axis cross travel with 4 Solid Box Ways provides precision & rigidity
- Remote Manual Pulse Generator
- Telescopic steel way cover on three axes
- Screw type chip conveyor
- Full Guarding
- Coolant System and air blast system
- Central lubrication system, auto power off
- Built-in Quartz work light and Alarm lamp
- Rigid tapping , 4th Axis pre-wired
Specification:
Table: | 39.3” x 94.5” ( 1000 x 2400mm) |
Longitudinal travel (X axis ): | 86.6” (2200mm) |
Cross travel: | 39.3” (1000mm) |
Vertical travel: | 31.5” (800mm) |
Spindle nose to table top (D): | 9.8”-41.3” (250-1050mm) |
Column surface to center of table: | 21.6”-61” (550-1550mm) |
Load capacity: | 4840 lb (2200 Kg) |
Spindle taper: | CAT50/BT50 |
Spindle Speed (r. p.m.): | (60Hz) 6,000 rpm |
Transmission of spindle & motor: | Gear type (Hamada) |
Spindle center to column front surface: | 41.3” (1050 mm) |
Feed Rate: | |
Rapid feed rate: | X/Y: 472 ipm Z: 393 ipm |
Cutting feed rate: | 1-315 ipm |
Motor: | |
Spindle motor: | 30HP |
Feed motors on XYZ: | 4 /4/7Kw, Alpha 30i |
Coolant pump: | 0.75Kw |
Lubrication pump: | 150Kw |
Power requirement: | 35 KVA |
Automatic Tool Changer: | |
No. of tools: | Swing-Arm type 32 tools |
Max. tool diameter: | 4.7”/9.8” (120/250 mm) |
Max. tool length: | 11.8” ( 300 mm) |
Max. tool weight: | 33 lb (15 Kg) |
Length X Width X Height (LXWXH): | 181” x 138” x 130” (4600mm x 3500mm x 3300mm ) |
Net Weight: | 38500 lbs. ( 17500 Kgs) |