Column Traveling type
510WM1/WM2 / 615WM1/WM2 / 620WM2/WM2 / 715WM1/WM2 / 820-825-830WM1/WM2 / 920-930WM1/WM2
Features:
The column moves transversely only. This guarantees uniform contact between the column slide and the machine bed in any column position.
Castings are made of high quality ribbed cast iron.
X&Z slide ways are laminated with Turcite-B.
The elevation guide ways (Y axis) are hardened and ground.
The spindle is supported by P4 preloaded super precision angular contact ball bearings to guarantee a maximum 2 micron run out.
Hydraulic system with a specially designed valve enables smooth table reversing with a 30meter/min table speed.
Separate hydraulic unit and cooling device prevent temperature rise of hydraulic oil and permits easy maintenance.
Standard hydraulic over-head wheel dresser.
Automatic lubricating system to ensure smooth and long lasting operation in all 3-axes.
Mitsubishi PLC will provide years of reliable and trouble-free operation.
Modern 6- inch color LCD touch screen panel, simply touch the screen to set the grinding variables.
Down feed mechanism is driven by an AC servomotor with grade C5 precision ball-screw, with minimum 0.001mm increment capacity.
Manual Pulse Generator (MPG) is also provided for user’s convenience.
The crossfeed travel is set by the push-button on the console; different crossfeed increments can be set for both rough and finish grinding.
The control system will store the last grinding cycle in memory. Simply press the cycle start button to repeat the previous operation.
Control also available in two axes.
Sizes available from ( 500~900 )mm by ( 1000~3000 )mm.