Print This Page


  • 10" x 54" Table.
  • 5HP heavy duty strong head. 
  • NST#40 spindle material SAE4115 (SCM415) full piece by hardened & ground.
  • Turcite B on hardened & ground X,Y,Z slideways.
  • Electroless Nickel Phosphorus Process on X & Y Lead Screws.
  • Grinding on table T-slot.
  • Square ways on Y & Column.
  • Highly improved Vari-Speed head.
  • Dia.1-1/2" (38mm) Diameter Lifting Screw.
  • Leveling Screws & Pads on Base.
  • Strict hand scraping for High precision & accuracy.
Table size:10"×54"
T-Slot No.x Size: 3×0.629"
Longitudinal travel (W/O power feed ): 34"
(With power feed ): 30.5"
Cross travel: 16"
Travel of knee:17"
Ram travel:22"
Quill travel:5"
Table to spindle nose (D): 3.3"~21"
Over swivel on turret:360°
Head Swivel ( R & L ): ±45°
Head tilt ( UP & DOWN ):Option
Spindle to column (E) : 7"~29"
Spindle motor:5HP
Spindle taper: NST#40
Quill feed:0.0015"-0.003"-0.006"
Spindle Speed (r.p.m.): 50Hz Low:40~415 Hi:415~3600
60Hz Low:60~500 Hi:500~4300
Overall height (A):93-1/2"
Overall depth (B): 83-1/2"
Overall width (C):72.4"
Net Weight: 3500 lbs

Home   About   Contact